Produkty dla z kołnierzem (444)

100% Acrylic

Slot key, grub screw and serrated washer, steel. Nut and washer, brass. Version Slot key, grub screw and serrated washer, electro zincplated. Note For protecting installations and persons. Connectors for earthing aluminium profile structures and interconnecting the aluminium profiles by integrating them into the protective earth (PE) system. Conductive contact is established through defined destruction of the oxide layer in the slot base and on the slot flanks. The cable lug must be positioned between the serrated washer and the washer during assembly. Reference:10470

UNI lock double clamp modules are particularly suitable for the direct clamping of workpieces. Workpieces with complex geometry can be completely machined on 4 and 5 sides. UNI lock double clamp modules can be mounted in any position. The high clamping forces are generated by the integrated spring package. (the unit clamps while not pressurised). Clamping is released pneumatically. The following clamping forces are possible with the UNI lock clampng pin in conjunction with M10, M12, M16 fastening screws: Clamping force (M10) 35,000 N Clamping force (M12) 50,000 N Clamping force (M16) 75,000 N Supplied with: 1 double clamp module incl. 3x pneumatic connections. Reference:42782 Material:Steel Opening pressure:6 bar, lubricated air Turbo pressure:6 bar Air connection:G 1/8

COSTUMES

100% Cotton

Heavy-duty forged latches for high tensile loads. Primarily used on utility vehicles, agricultural and construction machinery. A ratchet prevents unintentional opening when closed. To compensate for tolerances or to create enough tension the bail can be adjusted using the spindle D1. Order required catch plate version separately. The retaining force F1 applies to the latch, not the catch plate. Reference:05560 Material:Steel

Suitable hinge pin see 04250. The cam lever is an eccentric lever that moves along a logarithmic spiral. Its clamping properties are even over the entire contact surface of the cam. Reference:04310

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

MANTEAUX

Body and jaw holder hardened and ground. Note for ordering: Supplied with hexagon crank handle. Order jaw plates separately. Note: Mechanically operated centric vice. Suitable for automation: prepared with gripper slot for handling systems. Flexible mounting: suitable for zero-point systems, mounting on machine tables or on custom systems via a baseplate. Centring precision: +/- 0.02 mm. The use of a torque wrench is recommended to achieve a controlled clamping force. Features: Clamping slide and spindle nut in one piece Slots and fastening threads for mounting attachment jaws Reversible jaws (accessories) with lateral thread for workpiece stop enables a wider clamping range Good swarf and coolant removal Reference:41102

Body carbon steel, black oxidised. Jaw carbon steel, tempered, black oxidised. Note: The adjustable toe clamp is used together with the rack plate CL. Reference:04470-05

We supply different styles dog collar snap buckle for dog collar or other pet collar use etc. The dog collar snap buckle size and color can be customized according to customer’s requirement. Specifications: Name Dog Collar Sanp Buckle MaterialBrass, Alloy Styles Various SizeVarious PackingStandard Packing MOQ5000 pcs mixing size ProcessDie Cast,Die Struck,Stamped,Plating, Painting Color Standard Color or As Customized ApplicationBags, luggage, garments, dog collar, transportation fastening etc. CertificateISO9001 Model:SNBK029 MOQ:1000PCS Delivery Time:10 DAYS Country of Origin:China

The pneumatic swing clamp is suitable for clamping workpieces from above. The swivel and clamping function occurs pneumatically. The swivel function enables unobstructed insertion and removal of the workpiece. Optimum accessibility to the workpiece is guaranteed. The foot of the housing offers universal fastening possibilities, enabling the swing clamp to be optimally aligned with the workpiece being clamped. The swing clamps are available in left or right swivelling versions. Pneumatic swing clamps can also be placed in multiple positions on the workpiece and operated in a particular order. They can be controlled manually or automatically. Reference:04365 Material:Carbon steel

mäntel

Design and construction This Schulz ball caster / ball transfer unit consists of three stamped parts, the casing, bearing shell and top cover, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5. Casing, top cover:galvanised steel, stainless steel Ball cup:tempered steel, tempered stainless steel Support balls:tool steel (tempered), stainless steel (tempered) Support balls:tool steel (tempered), stainless steel (tempered) Bearing ball:tool steel (tempered), stainless steel (tempered), plastic

1. Screw the locking screw into the collar bush, fixture clamp and clamping unit and screw onto the baseplate. 2. The workpiece is clamped by tightening the fixture clamp with a spanner. Advantages: Compact design Quick and easy clamping of components Pull-down effect Drawing reference: 1) Locking screw 2) Collar bush 3) Fixture clamp 4) Clamping unit Reference:04515 Material:Carbon steel Version:Black oxidised

Latches with draw bail for securing and locking hatches, container lids, machine cladding etc. By exceeding the dead centre they resist vibration. The locking force is applied by drawing on the bail. The latches can be screwed down or riveted. We recommend using countersunk screws for fastening the components. Order catch plates separately. Reference:05531 Material:Steel or stainless steel 1.4301

The 5-axis vice features excellent stability and flexibility, and is extremely easy to use. The 5-axis vice can be used as a positive-down force vice or normal vice. When the positive down force function is used, the workpiece can be held with a repeat accuracy of ±0.01 mm. A workpiece clamping height of 180 mm enables easy access during machining. The clamping width is preset using the crank handle, cutting down on setup times. Additionally, the closed geometries and the resistance to dirt that they provide keep maintenance and repair times to a minimum. Reference:41400

Handle electropolished or blasted. Thrust washer, hinge pin and screw bright. Note: The thrust washer face is lightly greased before delivery. The grease is FDA conform and is suitable for use in the foodstuff and pharmaceutical industries. Reference:04232

Two-piece shaft collars surround the shaft with a uniformly distributed clamping force. This leads to a dimensionally precise fit and very high retaining forces without damaging the shaft. The shaft tolerance should lie within h11. Two-piece shaft collars can be quickly and easily mounted or removed without dismantling other components. Reference:07812

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.

Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released. Reference:06613-10

100 % Acryl

100% Acrylic

Ratchet elements are used to connect two components together in any angular position with a positive fit. The ratchet elements with internal toothing (Forms A–D) can be combined with the ratchet elements with external toothing (Forms E–H) in any way depending on the application and installation possibilities. The springs mean that a new angular position can be quickly implemented. Reference:07820

100% Acrylic

mäntel

100 % Acryl

Completely mounted multi-clamping stations with integrated UNI lock Ø138 mm mounting clamps. The clamping stations are secured to the machine table directly or with clamps. Common bore patterns are pre-centred on the rear side for mounting. Clamping stations can be aligned via the 14H7 reference holes. The clamping stations are actuated via a central pneumatic connection. The high clamping forces are generated by the integrated spring package (the unit clamps in the de-pressurized state). The release process occurs pneumatically. The following retaining forces are possible with the UNI lock clamping bolt in conjunction with mounting screws M10, M12, M16: Retaining force (M10) 35,000N/module Retaining force (M12) 50,000N/module Retaining force (M16) 75,000N/module

Nuestros productos están elaborados con algodón orgánico y materiales reciclables. Se utilizan las telas solicitadas por el cliente. Producimos todo tipo de artículos textiles. ¡Tú diseñas, nosotros hacemos! Aceptamos pedidos de nuevas empresas y empresas existentes.